 |

All cement produced by Solid Cement (Antipolo) and APO Cement (Cebu) are made using the highest quality materials and processes and are manufactured under ISO 9001:2000 and ISO 14001 Quality Management Systems.
Rizal Portland Super
Rizal Portland Super Type 1P cement is specially formulated and manufactured with natural minerals to provide additional properties not found in ordinary Portland cement. The natural mineral component (Philippine Tuff) ensures increased strength and durability over time. This has long secured Rizal Portland Super as the builder's choice for structures that last for generations to come.
|
|
 |
Rizal Portland Super is used for the following applications:
- All-purpose cement for general construction applications, especially where structures are exposed to moderate sulfate environments or to chloride attack
- Roads, pavements, bridges, foundations, columns and slabs
- Pre-cast and pre-fabricated concrete products such as pipes, hollow blocks, pavers, floor and roof tiles
- Tanks, reservoirs, culverts, waterpipes & masonry units
Benefits >>
| Benefits |
|
Features |
| 1.- Higher ultimate strength |
|
With the passage of time, the natural mineral component in Rizal Portland Super has the ability to glue aggregates together and gives concrete its strength. This reaction continues until eventually compressive strength exceeds that of concrete using ordinary Portland cement. |
| |
| 2.- Reduced permeability |
|
The reaction between the natural minerals of Rizal Portland Super and the lime produced during
cement hydration effectively fills the void spaces between the fine aggregates, creating a more compact concrete that is less permeable to water, sulfates and other chemical agents that can attack the concrete and its steel reinforcements. This keeps away harmful sulfates and chlorides which often bring about cracking and concrete deterioration. |
| |
| 3.- Reduced expansion and heat of hydration and improved long-term durability |
|
For massive structures, Rizal Portland Super reduces thermal-induced stresses that may lead to cracking and loss of structural integrity. This is because the natural minerals in Rizal Portland Super decrease the heat generated during cement hydration, reducing the high temperature differentials in the structure that lead to internal stresses. |
| |
| 4.- Moderate sulfate resistant type of cement |
|
It passes the requirement for Moderate Sulfate Resistant Cement. Mortar expansion in sodium sulfate solution, observed at the six month and one year intervals, shows that it can withstand severe reactions with salts that destroy concrete. It is suitable for applications near the sea, such as harbors and piers, where sulfate content is high. RIZAL PORTLAND SUPER is not as reactive to sulfates unlike other Portland cements. This ensures that structures are durable because its sulfate resistance prolongs the life of exposed concrete. |
| Rizal Portland Super Cement |
| Quality Parameters |
Unit |
PNS 63 : 2006 Type 1P |
ASTM C595 : 2009
TYPE 1P |
Typical Results |
| Setting Time VICAT |
Initial Set, not less than |
minutes |
45 |
45 |
100 - 210 |
Initial Set, not more than |
minutes |
420 |
420 |
240 - 360 |
|
| Fineness |
Passing 45 μm |
% |
|
|
87 - 92 |
Blaine |
cm2/g |
2800 min. |
2800 min. |
4500 - 5200 |
|
| Compressive Strength |
3 days |
MPa |
13.0 min. |
13.0 min. |
15 min. |
7 days |
MPa |
20.0 min. |
20.0 min. |
24 min. |
28 days |
MPa |
25.0 min. |
25.0 min. |
34 min. |
Note: The methodology used in these tests is in accordance with American Society for Testing and Materials (ASTM) and Philippine National Standards (PNS) methods of testing. Test results may vary depending on the actual condition of the laboratory, condition of the sample prior to testing, quality of machine used, and the expertise of the person conducting the test. |
Rizal Portland Super is available in 40-kilogram bags and in bulk.
Rizal Masonry Cement
Rizal Masonry Cement is a Type M masonry cement that earns its name as the sustainable alternative to other types of cement in masonry applications. It effectively minimizes the carbon footprint of regular Portland cement by as much as 32% thus, Rizal Masonry Cement is considered an environment-friendly type of cement. Through XD 100 nanotechnology, it allows better moisture retention and adhesion strength for improved usage.
|
|
 |
Rizal Masonry Cement is used for the following applications:
- Plastering (exterior and interior)
- CHB laying/ core filling
- Tile adhesive/ grouts and fabrication of decorative stone and stucco
- Other semi-structural masonry works (driveways, sidewalks, fencing)
- Ground floor slab concreting
Benefits >>
| Benefits |
|
Features |
| 1.- Savings both in labor costs and usage |
|
A bag of 36-kg Rizal Masonry Cement has the same plaster coverage of a regular 40-kg Portland
cement while also providing a smoother finish. |
| |
| 2.- Higher workability compared to traditional cement products |
|
A special characteristic of Rizal Masonry Cement is the water retention capability of mortar which
prevents water from quickly evaporating, and thus prevents the mix from drying up quickly. This makes the mortar workable over a certain period of time compared to ordinary Portland cement. |
| |
| 3.- Less plaster cracking |
|
The air entraining property of cement serves to relieve internal pressure that develops inside the mortar due to changes in temperature and moisture. |
| |
| 4.- Environment-friendly |
|
The carbon footprint is lowered by 32% as opposed to regular Portland cement. |
| Rizal Masonry Cement |
| Quality Parameters |
Unit |
PNS ASTM C91:2005 (TYPE M) |
Typical Results |
| Setting Time by Gillmore |
Initial Set , not less than |
minutes |
90 |
150 - 240 |
Final Set , not more than |
minutes |
1000 |
300 - 360 |
|
| Fineness |
Retained in 325 mesh |
% |
24.0 max |
17 - 19 |
Blaine |
cm2/g |
|
5000 - 6500 |
|
| Air Content |
Minimum |
volume % |
8.0 min. |
12 - 16 |
Maximum |
volume % |
19.0 max. |
|
|
| Water retention |
% |
70.0 min. |
78 - 85 |
|
| Compressive Strength |
7 days |
MPa |
12.4 min. |
15 min. |
28 days |
MPa |
20.0 min. |
25 min. |
Note: The methodology used in these tests is in accordance with American Society for Testing and Materials (ASTM) and Philippine National Standards (PNS) methods of testing. Test results may vary depending on the actual condition of the laboratory, condition of the sample prior to testing, quality of machine used, and the expertise of the person conducting the test. |
Rizal Masonry Cement is available in 36-kilogram bags.
APO Portland Premium
APO Portland Premium Type 1P cement is specially formulated and manufactured with natural minerals to provide additional properties not found in ordinary Portland cement. This ensures increased strength and durability over time. Trusted by builders, APO Portland Premium ensures quality that lasts for years to come.
|
|
 |
APO Portland Premium is used for the following applications:
- All-purpose cement for general construction applications, especially where structures are exposed to moderate sulfate environments or to chloride attack
- Roads, pavements, bridges, foundations, columns and slabs
- Precast and pre-fabricated concrete products such as pipes, hollow blocks, pavers, floor and roof tiles
- Tanks, reservoirs, culverts, waterpipes and masonry units
APO Portland Premium is available in 40-kilogram bags and in bulk.
APO Masonry Cement
APO Masonry Cement is a Type M masonry cement that earns its name as the sustainable alternative to other types of cement in masonry applications. It effectively minimizes the carbon footprint of regular Portland cement by as much as 32% thus, APO Masonry Cement is considered as an environment-friendly type of cement. Through XD 100 nanotechnology, it allows better moisture retention and adhesion strength for improved usage
|
|
 |
APO Masonry Cement is used for the following applications:
- Plastering (exterior and interior)
- CHB laying/ core filling
- Tile adhesive/ grouts and fabrication of decorative stone and stucco
- Other semi-structural masonry works (driveways, sidewalks, fencing)
- Ground floor slab concreting
Benefits >>
| Benefits |
|
Features |
| 1.- Savings both in labor costs and usage |
|
A bag of 36-kg APO Masonry Cement has the same plaster coverage of a regular 40-kg Portland cement while also providing a smoother finish. |
| |
| 2.- Higher workability compared to traditional cement products |
|
A special characteristic of APO Masonry Cement is the water retention capability of mortar which
prevents water from quickly evaporating, and thus prevents the mix from drying up quickly. This makes the mortar workable over a certain period of time compared to ordinary Portland cement. |
| |
| 3.- Less plaster cracking |
|
The air entraining property of cement serves to relieve internal pressure that develops inside the mortar due to changes in temperature and moisture. |
| |
| 4.- Environment-friendly |
|
The carbon footprint is lowered by 32% as opposed to regular Portland cement. |
| APO Masonry Cement |
| Quality Parameters |
Unit |
PNS ASTM C91:2005
(Type M) |
Typical Results |
| Setting Time by Gillmore |
Initial Set , not less than |
minutes |
90 |
150 - 240 |
Final Set , not more than |
minutes |
1000 |
300 - 360 |
|
| Fineness |
Retained in 325 mesh |
% |
24.0 max |
'8 - 14 |
Blaine |
cm2/g |
|
5000 - 6500 |
|
| Air Content |
Minimum |
volume % |
8.0 min. |
12 - 16 |
Maximum |
volume % |
19.0 max. |
|
|
| Water retention |
% |
70.0 min. |
78 - 85 |
|
| Compressive Strength |
7 days |
MPa |
12.4 min. |
15 min. |
28 days |
MPa |
20.0 min. |
25 min. |
Note: The methodology used in these tests is in accordance with American Society for Testing and Materials (ASTM) and Philippine National Standards (PNS) methods of testing. Test results may vary depending on the actual condition of the laboratory, condition of the sample prior to testing, quality of machine used, and the expertise of the person conducting the test. |
APO Masonry Cement is available in 36-kilogram bags.
Island Portland
Island Portland Type 1 Cement is specially made for high performance applications and highly engineered construction. It exceeds the strict standards of both Philippine National Standards (PNS) and Amercian Society for Testing and Materials (ASTM) making it the brand of choice for mega structures. Island Portland bests itself among other ordinary Portland cement brands through its early strength which translates to faster project completion.
|
|
 |
A general-purpose Portland cement suitable for all uses where special properties are not required. It can be used in:
- High strength concrete designs with a minimal cement factor requirement (ready-mixed concrete)
- Projects with tight completion schedules
- Precast and pre-stressed concrete
- Infrastructure -- roads, dams, bridges, railway structures
- Mega-structures, high-rise buildings, and condominiums
- Tanks, reservoirs, culverts, waterpipes and masonry units (mortars, renders and screeds)
Benefits >>
| Benefits |
|
Features |
| 1.- Early strength achieved in less time |
|
Island Portland Cement achieves higher compressive strength and permanence in less time compared to other ordinary Portland cement. This allows the early stripping of formworks. Strength at 28 days is set at a minimum 40MPa. |
| |
| 2.- Best in overall quality and consistency |
|
Repeated laboratory results have shown that Island Portland Cement has been consistent and even exceeds other cement types with the requirements and specifications of ASTM C150:2009 and PNS 07:2006, manufactured under ISO 9001, ISO/IEC Guide 17025:2005 (NATA Certified), and ISO 14001 Certified Systems. The careful evaluation of raw mix design using high quality raw materials and processes produces a high quality product with minimal standard deviations. |
| |
| 3.- Proven compatibility with mineral and chemical admixtures |
|
It is highly compatible with mineral and chemical admixtures should the contractor wish to modify the
performance of resulting concrete according to the requirement of the project. |
| Island Portland Cement |
| Quality Parameters |
Unit |
PNS 07:2005
(Portland Type 1) |
ASTM C150:2009 (Portland Type I) |
Typical Results |
| Setting Time by VICAT |
Initial Set , not less than |
minutes |
45 |
45 |
110 - 210 |
Initial Set, not more than |
minutes |
375 |
375 |
240 - 360 |
|
| Fineness |
Passing 325 mesh sieve |
% |
|
|
90 min |
Blaine |
cm2/g |
2800 min |
2800 min |
3200 - 3600 |
|
| Flow |
% |
|
|
105 - 115 |
|
| Free Lime |
% |
|
|
1.5 max |
|
| Normal Consistency |
% |
70.0 min. |
|
25.0 max |
|
| Compressive Strength |
3 days |
MPa |
12.4 min |
12.0 min |
24.0 min |
7 days |
MPa |
19.3 min |
19.0 min |
30.0 min |
28 days |
MPa |
27.6 min |
28.0 min (optional) |
40.0 min |
Note: The methodology used in these tests is in accordance with American Society for Testing and Materials (ASTM) and Philippine National Standards (PNS) methods of testing. Test results may vary depending on the actual condition of the laboratory, condition of the sample prior to testing, quality of machine used, and the expertise of the person conducting the test. |
Island Portland is available in 40-kilogram bags, tonner bags and in bulk.
Palitada King Masonry Cement
Palitada King Masonry Cement is a Type S masonry cement specially formulated and manufactured to produce a mortar with superior properties for use in masonry applications. Its plastering prowess is made possible by XD PLUS™ - an air entraining, plasticizing admixture technology which yields plaster that is not only highly workable, but is also self healing. This makes Palitada King highly resistant to craze cracking. XD PLUS™ also allows you to save up to 30% more cement in plastering by covering more wall area per bag.
|
|
 |
Palitada King is used for the following applications:
- Laying of concrete hollow blocks and all other types of masonry units (e.g. bricks, stones, etc.)
- In-filling of concrete hollow blocks
- Plastering of external and internal walls
- Decorative finishes
- Used as an ingredient for tile grout, tile adhesive, and stucco
Benefits >>
| Benefits |
|
Features |
| 1.- Superior adhesion |
|
Performance additives ensure superior adhesion of mortar made with PALITADA KING. In addition, the mortar readily flows into the surface irregularities of masonry units, thus allowing more contact between the mortar and the masonry surface. |
| |
| 2.- Enhanced workability and longer board life |
|
The mortar is more convenient to prepare and use. It is easily spread and provides better grip on vertical surfaces. This assists masons in achieving a higher level of workmanship that results to an improvement in the quality and speed of masonry construction works, thus reducing costly back-jobs and reworks. Furthermore, masons do not have to stop to re-temper the mortar. This results to lower material and labor costs. |
| |
| 3.- Increased water retention and less cracking |
|
Mortar created from PALITADA KING is less prone to rapid dehydration during dry, hot, or windy days.
This minimizes shrinkage and stresses that lead to cracking. |
| |
| 4.- Smoother and lighter color |
|
Masonry wall finishes are smoother in texture and lighter in color which results to lower surface preparation and painting costs. |
| Palitada King Masonry Cement |
| Quality Parameters |
Unit |
PNS ASTM C91:2005
(Type S) |
Typical Results |
| Setting Time by Gillmore |
Initial Set , not less than |
minutes |
90 |
150 - 240 |
Final Set , not more than |
minutes |
1000 |
300 - 360 |
|
| Fineness |
Retained on 325 mesh |
% |
24% max |
17 - 19 |
|
| Autoclave Expansion |
% |
1.0 max |
0.01 -0.05 |
|
| Air Content |
Minimum |
volume % |
8.0 min. |
11 - 13 |
Maximum |
volume % |
19.0 max. |
15 - 17 |
|
| Water retention |
% |
70.0 min. |
78 - 85 |
|
| Compressive Strength |
7 days |
MPa |
9.0 |
12.0 min. |
28 days |
MPa |
14.5 |
18.0 min. |
Note: The methodology used in these tests is in accordance with American Society for Testing and Materials (ASTM) and Philippine National Standards (PNS) methods of testing. Test results may vary depending on the actual condition of the laboratory, condition of the sample prior to testing, quality of machine used, and the expertise of the person conducting the test. |
APO Portland
APO Portland Type 1 Cement is specially made for high performance applications and highly engineered construction. It exceeds the strict standards of both the Philippine National Standards (PNS) and American Society for Testing and Materials (ASTM) making it the brand of choice for mega structures. APO Portland bests itself among other ordinary Portland cement brands through its early strength which translates to faster project completion.
|
|
 |
A general-purpose Portland cement suitable for all uses where special properties are not required. It can be used in:
- High strength concrete designs at minimal cement factor requirement (ready-mixed concrete)
- Projects with tight completion schedules
- Precast and pre-stressed concrete
- Infrastructure -- roads, dams, bridges, railway structures
- Mega-structures, high-rise buildings, and condominiums
- Tanks, reservoirs, culverts, waterpipes and masonry units (mortars, renders & screeds)
APO Portland is available in bulk, tonner bags, and 40-kilogram bags.
|
 |
|